Products

You Haven't Selected A Vehicle Yet. Please Select A Vehicle To See Parts For Your Car.
AEM CDI Pencil Coil
AEM’s new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, wh...
AEM EMS
AEM's Plug & Play Engine Management System (EMS) plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ...
AEM Fuel Ignition Controller (FIC)
AEM’s F/IC is a PC-programmable piggy-back controller that allows users to retard timing and add fuel to virtually any engine, even on variable cam timing engines (VTEC, iVTEC, VVTi, MiVEC, etc.). The...
AEM Peak & Hold Injector Driver
AEM’s external Peak & Hold Injector Driver module allows ECU’s that have a saturated injector drive circuit to trigger low impedance injectors with a true 4/1 Peak & Hold injector drive circuit. AE...
AEM Wideband UEGO Gauge
A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-cha...
APEXi Electronics - Accessories
Sensors, Harnesses and Accessories for all your A'PEXi products. ...
APEXi Electronics - Auto Timer
The Apex Auto Timer allows the vehicle to idle for a preset amount of time after the ignition key has been removed. In turbocharged vehicles this prevents hot oil in the engine from coking up in the l...
APEXi Electronics - i-Moni
The i-Moni (i-Monitor) is a simple plug-and-play monitoring device which instantly installs using any factory ISO 14230 OBD II diagnostic port. The i-Moni offers real time data display of up to four d...
APEXi Electronics - Rev / Speed Meter GP
The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. However, the strength of the new uni...
APEXi Electronics - SAFC NEO
The SAFC NEO marks the newest edition to the world famous Super AFC line of piggy back fuel controllers. Building upon the powerful SAFC II, the AFC NEO has taken piggy back style fuel control to a ne...
Blitz R-FIT
The BLITZ R-FIT is a full featured fuel controller applicable to most vehicles. It is equally effective on N/A engines with basic bolt-ons to turbocharged cars modified with higher boost. It is very i...
Blitz Turbo Timer - DTT
The BLITZ DTT (Dual Turbo Timer) DC IV is a one of a kind item. This is the only turbo timer in the world that incorporates a turbo timer with a boost gauge. The digital boost display can read up to 2...
Blitz Turbo Timer - FATT
The BLITZ FATT (Full Auto Turbo Timer) DC IV features the same unique two-piece design as the DC III's but with a LED back lit screen. Just like our other turbo timers, the compact face design allows ...
Blitz Turbo Timer - Harness
For most makes of Japanese sports cars there is a wiring harness available to aid fitment of Blitz Turbo Timers. The harness simply plugs into the ignition loom making all the necessary connections be...
Buddy Club Racing Spec Battery
*Buddy Club Racing Spec Battery RSB-25* * 12V22Ah * Multiple Battery Post Configurations * Compact Size (7" x 3" x 6.5") * Maintenance Free Sealed Design * Weights Only 16.4lbs *Buddy Cl...
Buddy Club SECU Timer
The Buddy Club SECU Timer has all the normal functions of the turbo timer and a very special new function - security lock.when the security lock is enabled, the correct password must be entered before...
Buddy Club VTEC Controller
The Buddy Club VTEC Controller gives you precise control of your VTEC engine. Having the ability to move your VTEC engagement is essential. The installation of cam shafts and other engine components m...
COBB Tuning AccessPORT
The COBB Tuning AccessPORT reprograms your vehicle's computer to optimize the air/fuel ratio and ignition timing, increase boost, remove the speed limiter, and more for performance results you can ins...
Cosworth Cam Angle Sensor Bracket
Used for mounting the cam angle sensor to the front of Non North American Spec STI cylinder heads. Useful for adapting our cylinder heads to Japanese and European market engines....
Edelbrock QwikData - Sensors/Thermocouplers/Meters
Edelbrock offers a complete range or Sensors, Thermocouplers and Meters for your Edelbrock QwikData Data Logging Unit....
Evolution Motorsports ECU Tuning
EVOMS in co-operative efforts with GIAC are proud to offer the safest, most powerful ECU tuning for your vehicle. The ECU program we offer will add up to 50HP and 85Ft/Lbs Torque. Please call for...
Gizzmo CamFC
The CamFC has an AFC (air/fuel controller) onboard so that fundamental fueling issues related to the addition of tuning accessories such as extractors, exhausts, adjustable cam gears, filters and mild...
Gizzmo Fuel Cut Defender
The Gizzmo FCD (Fuel Cut Defender) allows a vehicle to run a higher boost level without the vehicles ECU cutting the fuel supply at the factory specified boost level. The Gizzmo FCD totally isolates ...
Gizzmo KMon
The Gizzmo KMon professional knock monitoring kit takes tuning to the next level. The KMon was designed with leading tuners for tuners with endless hours of dyno development as a major component in th...
Gizzmo Launch Interface
Gizzmo's launch interface integrates with the Gizzmo Tach Recall Shift light to enable the fully adjustable launch control function. The launch control function induces sequential misfire events at th...
GReddy Boost Cut Controller
GReddy Boost Cut Controllers (BCC) allows the factory ECU limiters (or "fuel cut") to be eliminated electronically, by wiring the unit directly into the factory ECU harness. The Speed Cut Controller (...
GReddy e-Manage
GReddy’s e-Manage is a cost effective programmable engine management system that allows you to properly tune your factory engine control without having to change the entire factory ECU system to an ex...
GReddy e-Manage Ultimate
The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of ex...
GReddy e-Manage Ultimate Harnesses
GReddy e-Manage Ultimate Harnesses...
GReddy Profec E-01
The ultimate in electronic boost control is incorporated in our multi-tasker, the PRofec e-01. Designed as a combination boost-controller, data display/logger and original e-manage programmer. The e-0...
GReddy Speed Cut Controller
GReddy Turbo Timer
Designed to prolong the life of your turbocharge, while adding connivance. GReddy Full Auto Turbo Timers allow a vehicle to idle the engine for a timed period, with the ignition key removed. This conv...
GReddy V-Manage
V-Manage The V-Manage, Variable Valve Timing Controller was designed by GReddy engineers to take advantage of some of the modern technology OE Manufactures* are now commonly incorporating into th...
HKS ALC II (Automatic Line Controller)
The HKS ALC II has been developed as a plug-in interface with factory A/T Control Unit of the computer controlled automatic transmission on the ‘90-’96 Nissan 300ZX. The ALC II is designed to maintain...
HKS ETCS (Electronic Traction Control System)
The HKS ETCS-Less Kit, bypasses the ETCS function on the throttle-body on ‘93-‘98 Twin Turbo Supras w/manual transmissions. The ETCS-Less kit prevents traction control activation by eliminating the me...
HKS EVC Components
The HKS EVC is the hottest Boost Controller on the market - but it can always be better. Grab a Display Stand or Harness to complete that custom Install. Need some T-Fittings or Vacuum Hose when ins...
HKS EVC Install Kit
HKS EVC Installation kits are vehicle specific supplement kits of the standard hardware & fitting kit included in each EVC unit. The kits supply additional specialty hardware that is needed or recomme...
HKS Fan Controller
The HKS Fan Controller has been developed to control factory or aftermarket electronic cooling fans. This unit can control one fan at two speeds or two fans at one speed, and can set the fan(s) to tur...
HKS FCD (Fuel Cut Defencer)
The HKS FCD is an electronic device developed to properly raise the factory fuel cut level on factory turbocharged vehicles. As modifications are made to optimize engine performance, the factory fuel ...
HKS GCC (Graphic Control Computer)
The HKS GCC (Graphic Control Computer) is an electronic tuning component which adds flexibility to the fuel tuning capabilities of the VPC, PFC F-CON or F-CON S. It plugs into either the VPC or F-CON ...
HKS PFC F-CON (Programed Fuel Computer)
The HKS PFC F-CON is a plug-in fuel management system designed to supplement and refine the OEM fuel curve to maintain a proper air/fuel mixture when increasing boost pressure in turbocharged applicat...
HKS PFC F-CON Harness
Vehicle specific wiring harnesses to allow simple plug-in integration of VPC inbetween the factory wiring harness and ECU....
HKS PFC F-CON ROMs
Vehicle specific ROM microchips with tuning level specific tuned fuel map programs for PFC F-CON units. ...
HKS REV AD
The HKS RevAd is an electronic device designed to multiply a single digital 0-5volt signal. Many electronic air/fuel and timing controllers require a 0-5volt digital signal to operate properly. The HK...
HKS RPM Signal Level Converter
The HKS RPM Signal Converter is an electronic device engineered to convert a 12volt analog signal to a 0-5volt digital signal. A 0-5volt digital signal is typically required for most air/fuel or timin...
HKS SLD (Speed Limit Defencer)
The HKS SLD is an electronic device designed to eliminate a vehicle’s factory speed limiter. When competing on the drag strip or a circuit track, the factory speed limiter can hinder a vehicle’s perfo...
HKS Turbo Timer Harness
HKS Turbo Timer harnesses allow